Flowplant 3003 JetCart mobile trolley
mounted water jetting unit 3,000 psi
(200 bar) at 3.2 gpm (14.5 l/min). Ideal
for smaller drains and inaccessible areas
this versatile unit is powered by a 9 hp
Honda petrol engine and weighs
only 86kg.
 

 Specification  Send me details

210 Bar (3,000psi) at 36 L/min(8.0gpm)

The DTM trailer unit is aimed directly at drain
cleaning contractors and municipalities who
want to clean small bore drains up to 200mm
(8"), or to clean surface areas such as
pavements, driveways and drive-ins.

The DTM is based on the larger DTB trailer
and is fitted with the latest generation Yanmar water-cooled diesel engines.
The DTM also comes with a two-year warranty on the Harben 'P-Type'
pump-head, gearbox and engine, with a standard one-year guarantee
covering the remainder of the machine.
 

Specification Send me details

Various pump options from 2600 psi @ 16 gpm to
4600 psi @ 10 gpm

The DTB 500 Super 6 is used widely by plant hire
companies and cleaning contractors as a heavy
duty high pressure jetter for all types of high
pressure cleaning from drain cleaning to all types
of surface cleaning. The DTB 500 Super 6 is a well
proven jetter with a good pedigree for performance
and reliability.
 

Specification Send me details

Various pump options from 3,500psi
@ 15.4 gpm to 5,000psi @ 11.7gpm


The DTB 500 is a worthy replacement for
the hugely popular DTB trailer mounted
jetting unit. It has an all new chassis which
has been strengthened and stiffened to take the 500 litre (110 gallon) rotationally
moulded water tanks. Power to drive the Harben P type pump comes from the
latest Yanmar emission compliant engine, one of the quietest available, capable
of delivering 275 Bar (4,000psi) at 59 L/min (13gpm) – ideal for the toughest drain
cleaning jobs. Operators will love the huge workrate that is available from the
increased water tank size. Tests have shown that up to 50% more meterage can
be cleaned in the same time, leading to increased efficiency and higher profits.

Specification Send me details

From 3,500psi @ 15.4gpm to 5,000psi @ 11.7gpm


The DTX is a class-leading, heavy-duty, 4-wheel,
trailer mounted, high-capacity jetting unit with the
versatility to tackle the cleaning of large diameter
pipes and sewers as well as a wide variety of
industrial cleaning tasks.

A popular unit that sells well all over the world, the DTX is also fitted with heavy-duty, rotationally-moulded polyethylene water tanks with a maximum capacity of 908 litres
(200 gallons). This means that the unit, which is fitted with the legendary Harben
'P-Type' pump, can operate for much longer on-site before the water tanks need
refilling.
 

Specification Send me details

280 Bar (4,000psi) at 90 L/min(20gpm)

The new DTQ trailer unit is the most powerful trailer
mounted drain cleaning machine to hit the market.

Mounted on a sturdy 4 wheel fast tow chassis with 200
gallons of water contained in rotationally moulded plastic
water tanks, the DTQ will tackle drains and sewers up to
24" (600mm) in diameter. The hydraulic hose reel will hold
up to 150m of 5/8" high-pressure hose, delivering enough
power to de-scale and root cut in the toughest conditions.

Specification Send me details

From 250 Bar (3,500psi) at 70 L/min(15.4gpm)
to 350 Bar (5,000psi) at 53 L/min(11.7gpm)

Flowplant manufacture a wide range of vanpacks,
from the 16.5kW Mini Van Pack to the larger 60kW
Standard Van Pack. Flowplant vanpacks are built
to offer the most practical and cost effective means
of carrying out all high pressure cleaning tasks.

 Flowplant specialise in compact diesel drive units offering key benefits such as:

• Easy and quick removal from the van
• No specialised vehicles required
• Fully silenced options available
• Most cost effective method of driving a high pressure unit in a van

Specification Send me details

The Compack Jet range delivers exceptional value for
money from the UK’s largest manufactures of drain
cleaning jetters. In built safety features and class leading
performance make the Compack jetters the ideal choice
for drain cleaning contractors and plumbers alike.

• 3000 psi jetting pressure with 8 gpm high pressure
  pump.
• ‘Safe pack’ features including emergency stop, battery
  isolator, hose reel circuit breaker and removable fuel tank.
• Powered in hose reel with 60 metres of high pressure hose.
• 20 hp Vanguard V twin electric start petrol engine.
• Heavy duty battery.
• Powered coated frame
• 70 gallon plastic water tank.
• Low oil pressure shutdown.
• Easy siphon anti freeze valve.
• Dump type jetting system.
• Hose drip tray.
• Fits all popular vans.
• Optional trailer unit.

Specification Send me details

A wide range of performance options with
max pressures from 470 Bar (6,800psi) to 700 Bar
(10,000psi) and max flows from 52 L/min (11.5gpm) to
155 L/min (34gpm)

The Century Trailer is a heavy-duty, industrial high-pressure
cleaning unit with a unique feature - the Harben Century
pump. The Century pump has all the same remarkable features
as the P-Type pump, but has a remarkable flow variance over
various pressures up to 700 Bar.

This feature enable the contractor to have a jetting system capable of tackling
industrial surface preparation tasks at high pressure, and to also have the
capacity to clean large diameter pipes at lower pressures. For example the
822.519 Century pump produces 55 L/min at 700 Bar, and 100 L/min at 140
Bar - just by changing the nozzle!

Advanced trailer design and options of a variable speed hydraulic rewind hose reel
have made the Century Trailer one of our most widely sold jetting systems.

The Century Series is also available on a wide range of heavy-duty skid
frames. The unit can be mounted on a simple skid with integral fork-lift channels
for ease of portability, as well as a wide range of offshore specifications.

Specification Send me details

A wide range of performance options with max
pressures from 140 Bar (2,000psi) to 350 Bar
(5,000psi) and max flows from 18 L/min (4gpm)
to 45 L/min (10gpm)

The A-Frame series are three-wheel trolley
mounted  electric powered jetting units featuring
the Harben P-Type Pump.

A-Frames are fitted with a steering arm, lifting eye, 
300ft capacity manual hose reel and water break tank complete with
ball valve. Standard motors are 415V, 6 pole, 50Hz to IP55 weatherproof 
specification. Other voltages and frequencies are available on request.

Specification Send me details

A  wide range of performance options with max
pressures from 470 Bar (6,800psi) to 700 Bar
(10,000psi) and max flows from 52 L/min
(11.5gpm) to 155 L/min (34gpm)

The Century Skid is a heavy-duty, industrial
high-pressure cleaning  unit with a unique
feature - the Harben Century pump. The Century 
pump has some remarkable features including
a wide flow variance over various pressures up
to 700 Bar.

This feature enables the contractor to have a jetting system capable of tackling
industrial surface preparation tasks at high pressure,  and to also have the
capacity to clean large diameter pipes at lower pressures. For example the
822.519 Century pump produces 55 L/min at 700 Bar, and 100 L/min at 140 Bar
- just by changing the nozzle!

The Century Series is available on a wide range of heavy-duty skid frames and
trolleys. The unit can be mounted on a simple skid with  integral fork-lift channels
for ease of portability, on a robust  four-wheel site trolley with a crash frame,
steerable front axle  and towing boom, or built specifically for a wide range of
offshore specifications.

Specification Send me details

1000 Bar (14,500psi) at 60 L/min (13gpm)
 

Trailer Unit
The Hydroblaster trailers provide an extremely  high
level of performance and have a proven record of
reliability  in some of the most arduous operating
areas.

The heavy-duty Hydroblaster trailer is designed primarily for concrete
hydrodemolition and for high-pressure work within the petrochemical 
industry, and is based on the wide bodied Neolith series trailer.

Skid Unit
The Hydroblaster skids use the same pump and power  package as
the trailer and can be mounted on a simple base plate or within a crash
frame. Both skid types come with forklift channels,  whilst the crash frame
version also has four point lifting eyes.  It can also be fully enclosed if a
silenced option is required.

Specification Send me details

A wide range of performance options with max
pressures of 1000 Bar (14,500psi) and max flow
of 450 L/min (99gpm)

The AHF-215 is a smooth action triplex positive
displacement plunger pump designed to give
constant flows at powers up to 110kw with
operating pressures from 150 to 1000 bar. A
wide variation in pressures  and volumes can
be achieved through a simple fluid end change.

The AHF-215 is suitable for: drain and sewer cleaning; pipe and  tube cleaning;
pressure testing boilers, pipes and tanks; high pressure water jet cleaning and
descaling and abrasive surface preparation. The pump can be supplied for
installation into new or existing plant, mounted on our standard skids, site
trailers and road trailers, or in packages  tailored to suit your needs.

Specification Send me details

The AHF-308 is a smooth action triplex positive
displacement plunger pump designed to give
constant flows at powers up to 75kw with operating 
pressures from 150 to 1000 bar. A wide variation
in pressures and  volumes can be achieved
through a simple fluid end change.

The AHF-308 is suitable for: drain and sewer
cleaning; pipe and  tube cleaning; pressure
testing boilers, pipes and tanks; high pressure
water jet cleaning and descaling and abrasive
surface preparation. The pump can be supplied for installation into new or
existing plant, mounted on our standard skids, site trailers and road trailers,
or in packages  tailored to suit your needs.

Specification Send me details

The AHF-312 is a three cylinder positive
displacement plunger pump, designed to provide
a smooth and constant flow of liquid at powers
ranging from 90kW up to 123kW, with operating
pressures up to 1000 bar (14,500psi) and max
flow of 300l/min (72gpm).

Wherever there is a need for pumping liquid
at high pressure you’ll find are equipment used.

• Powering industrial water hydraulics systems
• Powering roof supports, suppressing dust and dewatering in coal mines
• Desalination by reverse osmosis
• High pressure cleaning and descaling
• Jet cutting of materials of all kinds
• Drain cleaning

Specification Send me details

A wide range of performance options with max pressures
of 1000 Bar (14,500psi) and max flow of 900 L/min (198gpm)

The AHF-430 is a smooth action twin triplex positive
displacement  plunger pump designed to give constant
flows at powers up to 220KW,  with operating pressures
from 150 to 1000 bar. A wide variation in pressures and
volumes can be achieved through a simple fluid end
change.

The AHF-430 is suitable for: drain and sewer cleaning; pipe and  tube
cleaning; pressure testing boilers, pipes and tanks; high pressure water
jet cleaning and descaling; surface preparation and hydraulic systems. 
The pump can be driven by diesel engine, hydraulic or electric motor.  They
can be supplied for installation into new or existing plant, mounted on our
standard skids, site trailers and road trailers,  or in packages tailored to suit
your needs.

The AHF-430 is also available with larger gearing for even better  performance
as the AHF-625.

Specification Send me details

Flowplant offer a wide range of hydrostatic test rigs for pressure testing pipelines, boilers and any other pressure vessel in need of certification. We work closely with our customers to ensure that each bespoke design matches their requirements exactly whilst offering good value and ISO9001:2008 approved quality. You will find Flowplant test rigs operating around the world in the most arduous conditions, offshore, onshore and even sub-sea.

Flowplant hydrostatic test rigs can be:

• Up to 1,000 bar capability
   
• Filling flows to 380 l/min
   
• Dual pump units giving quick fill combined with high pressure capability
   
• Electric, diesel and hazardous area configurations
   
• Certified skids available for offshore use
   
• Pressure compensated available pumps for sub-sea operations

210 Bar (3,000psi) at 19 L/min (4.2gpm)
A powerful heavy duty, trailer mounted
hot water washing unit for all types of
industrial cleaning, extremely popular
amongst industrial cleaning contractors,
municipalities and plant hire companies,
for graffiti removal, chewing gum and
numerous other applications.

Specification Send me details

210 Bar (3,000psi) at 19 L/min (4.2gpm)
This unit has the same robust
specification of the H3004D but
with twin mounted integral tanks
giving 900 litre (200 gallon)
capacity.

Specification Send me details

Wherever you find quality restoration work taking place, you'll probably find Neolith cleaning chemicals. Why? Because Neolith's vast experience in providing cost-effective solutions for the building-cleaning  industry
has enabled them to design a complete range of
chemicals with individual formulas to suit any application.

What's more, because of increasing environmental concerns, you'll also find that Neolith cleaning chemicals have been specially designed  to be biodegradable. Perhaps that's why many Local Authorities now specify that only Neolith chemicals are used for their surface restoration work.

On a global basis, the Rijksmuseum in Amsterdam, the FBI Building in Washington and the Hungarian Houses of Parliament are just  a few of the buildings successfully brought back to their former glory by contractors using Neolith chemicals.

Click on a structure number to find out more.

Mk5 Dry Abrasive Kit
 
Equipment Included:
Mk5 Abrasive Injector Head, 10 metres x 5/8" Sandblasting Hose and Sand  Poker.

The Mk5 Dry Abrasive Injector Kit operates on the Venturi principle  in the same way as the Mk1A Injector Kit, but uses a single high velocity  pencil
jet and a ceramic nozzle in place of the ring jet. In addition to the standard ceramic head, a stainless steel Mk5 head is available  fitted with a tungsten carbide nozzle for use with Flowplant's unique  underwater blasting unit for diving applications.

Technical Information:
Max Pressure: 700 Bar (10,000psi)
Part Number: 023-013

Ball Jets
 
Small ball jets have a ¼" bspm hose fitting, large ball jets have a ½" bspm hose fitting.

Small Ball Jets:
056 - 590: 3 Rear Jets (30º)
056 - 592: 4 Rear Jets (30º)
056 - 593: 6 Rear Jets (30º)
056 - 591: 3 Rear Jets (30º), 1 Forward Jet (180°)

Standard Drain Jets
 
Standard drain jets have a ½" bspm hose fitting, and come with either  30º or 45º rearward facing jets.

Standard 30º Drain Jets:
056 - 580: 3 Rear Jets
056 - 582: 4 Rear Jets
056 - 584: 6 Rear Jets
056 - 586: 8 Rear Jets
056 - 581: 3 Rear Jets, 1 Forward
056 - 583: 4 Rear Jets, 1 Forward
056 - 585: 6 Rear Jets, 1 Forward

Standard 45º Drain Jets:
336 - 001: 3 Rear Jets
336 - 003: 4 Rear Jets
336 - 005: 6 Rear Jets
336 - 007: 8 Rear Jets
336 - 002: 3 Rear Jets, 1 Forward
336 - 004: 4 Rear Jets, 1 Forward
336 - 006: 6 Rear Jets, 1 Forward

High Efficiency Drain Jets
 
High efficiency drain jets are suitable for use in both drains and sewers,  due to their ability to withstand higher flow rates than standard drain jets. The jets are honed at a 30º angle, and can be ordered with either  a ½" or ¾" bspm hose fitting. A rotary Screma Jet can also be fitted to  HE drain jets.

High Efficiency Drain Jets:
056 - 670: 3 Rear Jets
056 - 672: 4 Rear Jets
056 - 673: 6 Rear Jets
056 - 674: 8 Rear Jets
056 - 671: 3 Rear Jets, 1 Forward
056 - 246: HE Drain Jet c/w Rotary Screma Jet

Desilting Jets
 
Plough jets are designed to sit on the bottom of the drain or sewer, flushing out silt and loose deposits that have settled there. Small plough  jets (with a ½" bspm hose fitting) are suitable for drains up to 6", whereas large plough jets (with a ¾" bpsm hose fitting) are suitable for larger diameters.

Small Plough Jets:
056 - 044: Plough Jet c/w 2 Fan Jets (30º Rear)
056 - 605: Neolith Plough Jet c/w 2 Fan Jets (30º Rear)

Large Plough Jets:
056 - 042: Plough Jet c/w 4 Fan Jets (30º and 45º Rear)
056 - 604: Neolith Plough Jet c/w 4 Fan Jets (30º and 45º Rear)

Nozzles & Jets
 
By changing the shape, size or type of nozzle fitted to a gun, the pressure  and jetting profile can be easily changed. Fans jets are used for most general jetting applications, pencil jets offer a more concentrated profile  and are ideal for detailed work where the jet needs to be concentrated on a small area, and general surface work can be sped up by using a rotary  nozzle.

15º Fan Jet
Jet Angle: 15º
Fitting: ¼" bspm
Part Number: Various

High Velocity Pencil Jet
Jet Angle: 0º
Fitting: ¼" bspm
Part Number: Various

P&A Spinning Nozzle Rotary
Fitting: 3/8" bspm
Part Number: 056 - 326

Turbo Jet Nozzle
 
Description:
This rotary jet has rounded guides to assist it negotiating bends and  to avoid becoming jammed in the pipe. The Turbo Jet can be fitted with extension jet arms and mounted to a centralising device if required.

Technical Details:
Outside Diameter: 65mm
Fitting: ½" bpsf
Pipe Size: 70 - 100mm (without extension arms)
Max Working Pressure: 700 Bar
Working Flow: 55 - 136 litres/min

Part Number:
056 - 322: Rotary Turbo Nozzle with 2 x 15º fwd jets
056 - 323 Rotary Turbo Nozzle with 2 x 15º rear jets

Rotary Jet Extension Arms
 
Description:
Designed to operate with the adjustable centraliser and either centraliser screma jets or the rotary turbo jet to increase the size of the tubes that can be cleaned effectively.  One O Ring is needed per Extension Arm.

Part Number:
056 - 278: 25mm Extension Arm
056 - 260: 35mm Extension Arm
056 - 279: 50mm Extension Arm
056 - 280: 75mm Extension Arm
013 - 278: 'O' Ring for Jet Extension Arms

Aquaspin Jets
 
Low Pressure Spinning Jets are available in 28mm, 40mm, 60mm and 100mm diameters. 28mm-60mm jets can work to 500 Bar (7,250psi), and the 100mm  nozzles can work to 250 Bar (3,600psi).

"RGS" Rotary Radial Nozzle
4 x 90º Cleaning Jets and 3 x Thrust Jets
6446: 28mm OD, ¼" bsp Connection Thread
6453: 40mm OD, ½" bsp Connection Thread


"HRH" Rotary Half Radial Nozzle
4 x 45º Rear Jets
6448: 28mm OD, ¼" bsp Connection Thread
6456: 40mm OD, ½" bsp Connection Thread

"HRV" Rotary Radial Nozzle
4 x 45º Forward Jets, 3 x Thrust Jets
6447: 28mm OD, ¼" bsp Connection Thread
6453: 40mm OD, ½" bsp Connection Thread

Rotary Combi Nozzle
2 x 90º Jets and either 2 x 45º Rear Jets or 2 x 45º Forward Jets
6449: 28mm OD, ¼" bsp Connection Thread
6455: 40mm OD, ½" bsp Connection Thread

Tube Cleaning Jets
 
Female Micro Jets
326 - 000: 45º Rear Jets (various configurations), 1/8" bspf fitting
327 - 000: 90º Side Jets (various configurations), 1/8" bspf fitting
331 - 000: 45º Rear Jets (various configurations), ¼" bspf fitting
331 - 500: Side Jets (various configurations), ¼" bspf fitting

Male Micro Jets
320 - 000: Various configurations, ¼" unf fitting
321 - 100: Various configurations, 5/16" unf fitting
056 - 085 / 056 - 095: Harben Type (various configurations), 5/16" unf fitting

Rotary Screma Jets
Rotary Screma jets all have a 16mm outside diameter, 1/8" bspf connecting  thread, and are suitable for 20-100mm tube sizes. Max working pressure is 700 Bar.
056 - 206: 2 x 45º Rear Jets
056 - 207: 2 x 90º Jets
056 - 218: 2 x 45º Forward Jets
056 - 286: 1 x 45º Rear Jet, 1 x 45º Forward Jet


Jet Leaders for Screma Jets
Jet Leaders fits into Screma Jets to give added thrust and utilise excess  water which will not flow through Screma Jet.
056 - 245: 2 x Rear Jets, 1/8" bspm x 1/8" bspf fitting

Screma Jet Hose
Screma Jet Hose has ¼" bspf x 1/8" bspm fittings.
055 - 158: 20' x ¼" Screma Jet Hose (MWP350 Bar)
055 - 160: 20' x 3/16" Screma Jet Hose (MWP 700 Bar)

S.O. Type Screma Jet
30mm OD, ¼" connecting thread, 35-50mm Pipe Size. MWP 700 Bar. Working Flow 40 - 73 litres per minute. ¼" bspf fitting.
056 - 262: 2 x 45º Fwd Jets, 3 x 180º Fwd Jets.
056 - 263: 2 x 90º Side Jets, 3 x 180º Fwd Jets
056 - 264: 2 x 45º Rear Jets, 3 x 180º Fwd Jets
056 - 265: 2 x 45º Fwd Jets
056 - 266: 2 x 90º Re ar Jets
056 - 267: 2 x 45º Rear Jets
056 - 284: 1 x 45º Fwd Jets, 1 x 45º Rear Jets

High Efficiency Drain Jet & Screma Combi
40mm OD, ½" Connecting Thread, 45-100mm Pipe Size. MWP 700 Bar. Working  Flow 55 - 100 litres per minute.
056 - 246: High Efficiency Drain Jet c/w 90º Screma Jet Fitted into Cap. ½" bspm
056 - 247: ¼" bspf Cap for High Efficiency Drain Jet to take Screma Jet
056 - 361: ¼" Towing Eye

Tube Cleaning Accessories
 
Adapters for Lances & Jets
8320: Adapter 1/8" bspf x M8 male
056 - 244: Adapter ¼" bsp x 5/16" unf
056 - 243: Adapter 1/8" bspm x 5/16" unfm
023 - 388: Screma Adapter 1/8" bspm x ¼" bspm

Foot Control Valves
031 - 043: Harben MkII Foot Control Valve. MWP 420 Bar (6,000psi)
033 - 274: Harben Century Foot Control Valve. MWP 830 Bar (12,000psi)
9370: Neolith High Pressure Foot Control Valve. MWP 1,500 Bar (21,750psi)

Miscellaneous Jets
 
In addition to the standard range of drain jets, Flowplant also produce  some specialist cleaning nozzles.

Bomb Type Drain Jet:
The bomb type drain jet is suitable for higher flows than standard drain jets, and is therefore fitted with a ¾" bspf hose fitting. The jets are  drilled at 45º and are available in a number of configurations.
339 - 000: Bomb Type Drain Jet (3R, 3R1F, 4R, 6R)

Talbot Low Impact Drain Jet
As its name suggests, the Talbot jet has been designed in conjunction  with Thames Water to reduce the impact on plastic drains whilst cleaning  at normal pressures. The Talbot jet has three special elliptical jets  drilled at 30º. The jet is fitted with a standard ½" bspm hose fitting.
056 - 616: Talbot Low Impact Drain Nozzle

Bomb Jet:
The bomb jet is designed for cleaning sewers with high flow-rates. The bomb jet is fitted with 8 rearward facing fan jets to provide maximum cleaning power. The bomb jet is supplied with a ¾" bspm hose fitting.
056 - 041: Bomb Jet c/w 8 Rear Facing Fan Jets

Ram Jets:
Ram jets are supplied in two sizes; small with 4 fan jets and a ½" bspm  hose fitting, or large with 8 fan jets and a ¾" bspm hose fitting.
056 - 358: Small Ram Jet c/w 4 Fan Jets
056 - 359: Large Ram Jet c/w 8 Fan Jets

Mini Jet Kits
 
Mini Jet Kits:
Mini Jet Kits are designed for cleaning small diameter drains and pipes. Two lengths of ¼" hose are available; 20' and 50', each supplied with  a small ball jet.
023 - 227: 20' x ¼" Mini Jet Kit
023 - 275: 50' x ¼" Mini Jet Kit

Micro Mini Jets:
For really small diameter pipes, Flowplant produce a range of Micro Mini Jets with a 1/8" bspf hose fitting. These minute jets fit onto 3/16" jetting  hose with a max working pressure of 350 Bar. In addition, a spinning jet (350 Bar MWP) is available to fit onto an 11mm OD micro hose.
032 - 601: 20' Micro Mini Jet Kit 300 Bar Max Working pressure
056 - 281: Micro Mini Jet 3 Rear (30º)
056 - 282: Micro Mini Jet 3 Rear Jets (30º), 1 Forward
055 - 159: 20' x 3/16" Micro Mini Jet Hose
N08 - 551: 11mm Combi Spinning Jet (30º Rear)
N06 - 935: 7 metres x 11mm OD Flexible Micro Hose to suit Combi Spinning Jet

Standard Hoverclean
 
Description:
The Standard Hoverclean can be powered by any pump which produces a minimum  flow of 36 litres/min (8 gpm) at pressures of between 140 Bar (2,000psi) and 350 Bar (5,000psi). Work rates depend on the type of surface being  cleaned and the power available but heavily soiled car parks have been  cleaned at a rate of 150m²/hour.

Technical Information:
Cleaning Path: 700mm
Max Flow: 68 litres/min (15 gpm)
Max Pressure: 350 Bar (5,000 psi)
Dimensions: 105cm (L) x 72cm (W) x 40cm (H)

Part Number:
032 - 478

Heavy Duty Hoverclean
 
Description:
The Heavy Duty Hoverclean is used for applications which require pressures in excess of 350 Bar, and where the operating environment is  unsuitable for the Standard Hoverclean. The Heavy Duty Hoverclean is housed within a steel framework and runs off heavy duty castors. Ground clearance  is adjustable and on/off control is via a dead-man's handle. Maximum working pressure is 500 Bar (7,000psi).

Technical Information:
Cleaning Path: 700mm
Max Flow: 82 litres/min (18igpm)
Max. Pressure: 500 Bar (7,000psi)
Dimensions: 105cm (L) x 74cm (W) x 17cm (H)

Part Number:
100 - 276

Rotablast Floor Cleaners
 
Rotablast floor cleaners are heavy duty self-rotating cleaning devices designed to operate in conjunction with  units up to 700 Bar and 155 litres per minute. Rotablasts are pushed by an operator on either pneumatic or solid castor wheels with the pressure  controlled by a dead-man's handle which diverts the high pressure flow to a low pressure dump line when released. Applications include paint removal  from spray paint booths in
car and truck manufacturing plants, shipside cleaning, cleaning of aircraft standing areas and rubber removal from the  surface of runways, removal of Camrex non-skid surfaces from aircraft carrier  decks and oil and grease removal from slipways, forecourts and garages.

Rotablast Range
 
Description:
Rotablasts are available with 400mm, 600mm and 1000mm cleaning paths,  and are all fitted with a tachometer. Maximum working pressure is 700  Bar (10,000psi), and units can cope with flows up to 155 litres/minute (34 gpm).

Part Numbers:
031 - 165: 400mm Rotablast with tachometer
031 - 136: 600mm Rotablast with tachometer
031 - 145: 1000mm Rotablast with tachometer

High Pressure Dump Guns
 
Dump guns are fitted with an additional barrel to 'dump' flow when the gun is not on pressure.

Mk II Gun Assembly
Max Working Pressure: 420 Bar (6,000 psi)
031 - 040

Mk II Gun Assembly Stainless Steel
Max Working Pressure: 420 Bar (6,000 psi)
031 - 045

Mk II Gun Choke for multi-gun use
Max Working Pressure: 420 Bar (6,000 psi)
032 - 114

Stainless Steel Manifold for two-gun use
Max Working Pressure: 900 Bar (13,000 psi)
023 - 332

Dump Gun
Max Working Pressure: 1,000 Bar (15,000 psi)
Part Number: 033-317

Dry Shut Guns
 
Dry shut guns are easily identified by their single barrel, and
need an unloader valve fitted to the unit to dump flow when
not under pressure. Dry shut guns are most suited to applications
 where excess water is required to be kept at a minimum, for
example inside  a warehouse.

Gun Assembly c/w 900mm (3ft) barrel and jet holder
Max temperature: 150°C (302°F)
Max Operating Flow: 40 litres/min (8.8 igpm)
Max Working Pressure: 310 Bar (5,000 psi)
Part Number: 033 - 362

Safety Clothing
 
Wet Suits, Yellow
Small: 061 - 037
Medium: 061 - 025
Large: 061 - 026

Helmet, Visor and Ear Defenders
One Size: 065 - 013

Goggles
One Size: 065 - 033

Rubber Gauntlets
One Size: 065 - 031


Metatarsal Safety Boots
065 - 076 (YELLOW) UHP SIZE 6
065 - 061 (YELLOW) UHP SIZE 7
065 - 060 (YELLOW) UHP SIZE 8
065 - 057 (YELLOW) UHP SIZE 9
065 - 058 (YELLOW) UHP SIZE 10
065 - 066 (YELLOW) UHP SIZE 11
065 - 065 (YELLOW) UHP SIZE 12

High Visibility Coat
One Size: 065 - 045

Safety Leader Hose
 
Safety leader hose is brightly coloured, and should be fitted between  the end of the jetting hose and the drain jet (or drain  jet extension bar where used) to warn the operator that the drain jet is near when rewinding the hose under pressure.

Safety Leader Hose:
055 - 093: 10' x ½" Safety Leader Hose (Orange)
055 - 450: 10' x ¾" Safety Leader Hose (Blue)

Drain Jet Extension
 
Drain jet extensions are hollow bars placed between the end of the jetting (or safety leader) hose and the drain jet. The correctly  sized bar with prevent the jet turning in the drain and shooting back towards the operator if it hits and obstruction. As a rule of thumb, the drain jet extension should be approximately 1.5 times the diameter of  the drain being cleaned.

Drain Jet Extension Bars (½" bspm x ½" bspf):
033 - 085: 9" Drain Jet Extension Bar
033 - 086: 12" Drain Jet Extension Bar
033 - 087: 18" Drain Jet Extension Bar
033 - 088: 24" Drain Jet Extension Bar

Drain Jet Extension Bars (¾" bspm x ¾" bspf):
106 - 057: 9" Drain Jet Extension Bar
106 - 056: 12" Drain Jet Extension Bar
106 - 055: 18" Drain Jet Extension Bar
106 - 054: 24" Drain Jet Extension Bar
106 - 053: 36" Drain Jet Extension Bar

Operation Manuals & Safety Literature
 
In addition to the manuals listed below, a limited number of foreign language manuals are also available. Please confirm availability and cost before ordering. All Safety Literature is produced by the Association of High pressure Water Jetting Contractors with the exception of the Flowplant  "Operators Guide" Cartoon Safety Booklet.

"Safety Code of Practice" Booklet
Published by the Association of High Pressure Water Jetting Contractors
057 - 062
 

Flowplant "Operators' Guide"
Cartoon Safety Booklet
061 - 259

Other Safety Literature:
Medical Accident Carrying Card (057 - 063)
"Do & Don't" Cautionary Card (057 - 064)
"Do & Don't" Adhesive Pack (057 - 065)
Weils Disease Poster (057 - 061)
Safety Sign c/w Health & Safety Logo (057 - 069)
Safety Sign "Keep Clear HP Water Jetting" (065 - 025)
Safety Sign Frame 600mm x 450mm for use with Safety Sign (065 - 054)
 

Pump Manuals:
Harben Operators Instruction Manual (061 - 225)
Harben P Pump / Hi Lift Repair Manual (061 - 352)
Harben Century Repair Manual (061 - 357)
Neolith NP180 Plunger Pump Manual (061 - 356)
 

Service Videos:
Harben P Pump Repair Video
Harben Century Repair Video

Hose Feed Guides
 
Hose feed guides are used to protect the jetting
hose from excess wear by preventing it dragging
against sharp metal or concrete corners when 
feeding the hose into a drain or sewer.

Hose Feed Guides:
055 - 147: Tiger Tail Hose Feed Guide

Remote Control Kits
 
A new Radio Remote system from Flowplant allows operators to control the jetting unit functions from up to 100 metres away. The “Echo Kit” meets current and impending Water Jetting Association codes of practice and means that the machine can be safely operated with just one man. When the operator selects the radio option from the panel on the machine he can then control the high pressure water stream, engine speed and engine stop functions from a rugged waterproof hand held transmitter pendant. The system works on a coded frequency that stops interference from any other radio source.

Phil Jones, Technical Director at Flowplant comments, “It is vital that the Echo Kit operates in a fail safe manner. The hand held transmitter is in constant radio contact with the machine. Should the operator stray outside the transmitter signal area the high pressure water stream is automatically shut off until he returns to the signal area and re-selects the high pressure water function”

The “Echo Kit” can be fitted to new Flowplant van pack machines or existing units using the standard Yanmar engine.

Unloaders & Pressure Control Valves
 
Pressure Control Valves should not be confused with Unloader Valves. There purpose is similar to an adjustable relief valve; they control the  pressure and volume discharged by the pump. However, excess flow is recycled or dumped and the pump is under a continuous load, unlike when an Unloader Valve is used. Pressure Control Valves are adjustable throughout their  pressure range to suit nozzle size and pump performance.

 

350 Bar Pressure Control Valve
 
Description:
This Valve has a maximum working pressure of 350 Bar, and can be hand-adjusted up to its maximum pressure with a flow rate of 90 litres per minute. This  type of valve gives complete control over any system giving a choice of  pressures (after correct nozzle selection) and minimising pressure losses caused by excessive water volume and hose size.

Technical Details:
Max Working Pressure: 350 Bar (5,000 psi)
Max Flow Rate: 90 Litres/min (20 gpm)
Inlet Connection: ½" bspm
Outlet Connection: ½" bspm
Weight: 3.5 kgs

Part Number:
023 - 157

830 Bar Pressure Control Valve
 
Description:
This valve has a maximum working pressure of 830 Bar, and is similar to  the 350 Bar PCV, but is designed for higher flows and pressures. These Pressure Control Valves are renowned for their reliability and the need for little, if any, maintenance.

Technical Details:
Max. Working Pressure: 830 Bar (12,000 psi)
Inlet Connection: ½" bspm
Outlet Connection: ½" bspm
Weight: 3.5 kgs

Part Number:
022 - 045
 

Unloader Valves
 
Unloader Valves are used mainly with Dead  Stop Guns, and will control water flow from the pump through to the nozzle when pressure is selected from the gun, or will re-circulate water  flow to a header/break tank. Unlike Pressure C ontrol Valves, when in re-circulation  mode, the load on the pump is reduced to almost nothing, but pressure  between the gun and the unloading valve is locked in the connecting hose. Any excess pressure must be discharged at the end of operation. Although hand adjustment is available in some of the valves below, most valves are pre-set for maximum working pressure and should not be adjusted.

Fixed Unloader Valves
 
UL-180
Operating Pressure Range: 10 - 200 Bar (145 - 2,900 psi)
Flow Rate Range: 5 - 30 litres/min (1.1 - 6.6 gpm)
Part Number: N05352

UL-221
Operating Pressure Range: 25 - 200 Bar (360 - 2,900 psi)
Flow Rate Range: 8 - 50 litres/min (1.7 - 11 gpm)
Part Number: N05353

UL-261/2
Operating Pressure Range: 100 - 280 Bar (1,450 - 4,060 psi)
Flow Rate Range: 12 - 75 litres/min (2.6 - 22 gpm)
Part Number: N05354

UL-300/1
Operating Pressure Range: 40 - 110 Bar (580 - 1,595 psi)
Flow Rate Range: 225 litres/min (50 gpm)
Part Number: 022 - 060

UL-300/2
Operating Pressure Range: 111 - 220 Bar (1,609 - 3,190 psi)
Flow Rate Range: 120 litres/min (26 gpm)
Part Number: N05356

UL-300/3
Operating Pressure Range: 221 - 400 Bar (3,205 - 5,800 psi)
Flow Rate Range: 60 litres/min (13.2 gpm)
Part Number: 022 - 064

UL-500/21
Operating Pressure Range: 50 - 270 Bar (725 - 3,915 psi)
Flow Rate Range: 15 - 130 litres/min (3.3 - 28.6 gpm)

UL-500/31
Operating Pressure Range: 250 - 500 Bar (3,625 - 7,250 psi)
Flow Rate Range: 15 - 225 litres/min (3.3 - 50 gpm)
 

Unloader Valves with Hand Adjustment
 
ULH-180
Operating Pressure Range: 10 - 200 Bar (145 - 2,900 psi)
Flow Rate Range: 5 - 30 litres/min (1.1 - 6.6 gpm)
Part Number: EN6033

ULH-180F (Panel mounted)
Operating Pressure Range: 10 - 200 Bar (145 - 2,900 psi)
Flow Rate Range: 5 - 30 litres/min (1.1 - 6.6 gpm)
Part Number: EN6034

ULH-1801 (With syphon injector)
Operating Press ure Range: 10 - 200 Bar (145 - 2,900 psi)
Flow Rate Range: 5 - 30 litres/min (1.1 - 6.6 gpm)
Part Number: EN6035

ULH-221
Operating Pressure Range: 25 - 200 Bar (360 - 2,900 psi)
Flow Rate Range: 8 - 50 litres/min (1.7 - 11 gpm)
Part Number: EN6037

ULH-260
Operating Pressure Range: 40 - 250 Bar (580 - 3,625 psi)
Flow Rate Range: 12 - 100 litres/min (2.5 - 22 gpm)
Part Number: EN6039

Miscellaneous Accessories
 
Centralisers
 
Adjustable Centralising Device
This sprung steel guide can be adjusted from 100mm (4") to 230mm (9"). A propulsion jet can be fitted, and the device will accept Turbo  Jets and Centraliser Screma Jets. Max Working Pressure is 700 Bar

056 - 242: Adjustable Centraliser Assembly
056 - 241: Adjustable Centraliser Screma Jet
056 - 236: Retro Jet for Adjustable

Heavy Duty Centraliser Device
The heavy duty centraliser can be fitted with various extension arms to  suit pipe diameters from 230mm (9") up to 450mm (18"). Spring loading allows for uneven surfaces. Accepts Turbo Nozzles and Screma Nozzles.


 057 - 031: 9" - 18" Heavy Duty Centralisers

Jet Pumps
 
Lightweight and low cost with no moving parts, Jet Pumps operate under the Venturi principle and can pump out dirty water, sludge, effluent and solids at extremely quick rates making it an ideal emergency tool for  daily operations. Heliflex discharge hose is not included unless otherwise stated.

Jet Pumps:
032 - 121: 1½" Jet Pump
039 - 001: 2" Jet Pump
012 - 075: 3" Jet Pump
012 - 152: 4" Jet Pump
032 - 427: 1½" Jet Pump & 10 metres of Heliflex Hose

Jump Jet Kits
 
Harben Jump Jet Kits can be factory-fitted to Harben P-Type or Century pumps. The device works by dumping the flow from one or more cylinders to produce a pulsing effect. This pulsing pulls the drain jet further than usual down the drain.

Jump Jet Kits:
057 - 022: Harben 'P' Type 3cyl or 4cyl Pump Jump Jet Kit
057 - 023: Harben 'P' Type 6cyl or 8cyl Pump Jump Jet Kit
010 - 027: Harben Century Jump Jet Kit